Are you interested in conveyor belting?

The development speed of the times is getting faster and faster, and technological changes have brought huge changes to the industry. Conveyor belting technology is becoming more and more advanced, which can help manual transportation of materials, save a lot of time, save repetitive manual labor, increase the speed of transportation, and become an indispensable part of material handling automation.

What causes the deviation of the conveyor belting?

What should I do if the conveyor belting runs off?

In what areas are conveyor belting used?

What causes the deviation of the conveyor belting?

One of the most common faults when the conveyor belting is running is the conveyor belting deviation. There are many reasons for variations, the main reason being poor installation accuracy and poor daily maintenance.During the assembly process, the head and tail rollers as well as the intermediate rollers should be on the same center line and parallel to each other as much as possible to ensure that the conveyor belting is not deflected or less deflected.In addition, the strap joints should be correct, and the perimeters on both sides should be the same. During use, if deviation occurs, the following checks must be performed to determine the cause and make adjustments.

What should I do if the conveyor belting runs off?

The parts and treatment methods that are often checked for deviation of the conveyor belting are: (1) Check the misalignment between the horizontal centerline of the roller and the longitudinal centerline of the belt conveyor. If the non-collapse value is greater than 3mm, use the long mounting holes on either side of the roller set to adjust it. The specific method is to refer to the deflection direction of the conveyor belting. The roller set should move forward in the direction of the deflection of the conveyor belting, or move backward in the opposite direction.(2) Check the deviation value of the two planes of the head frame and tail frame bearing seat. Here's how to adjust the head roller. When the conveyor belting deviates to the right of the roller, the bearing seat on the right side of the roller must move forward or the left bearing seat must move backward. If the conveyor belting is skewed to the left of the rollers, the rollers should move to the left. The bearing seat on the side should move forward or the seat on the right should move backwards. The adjustment method of the tail roller is that of the head roller. (3) Check the position of the material on the conveyor belting. If the material is not centered on the cross section of the conveyor belting, the conveyor belting will warp. If the material is skewed to the right, the tape will be to the left and vice versa. When using, the material should be as centered as possible.

In what areas are conveyor belting used?

Conveyor belting application industries: food, metallurgy, electric power, coal, chemicals, building materials, docks, food, etc.

Our company has professional and highly skilled personnel who can provide you with technical services. In addition, we have a complete after-sales system that can help you solve your problems after purchase. If you are interested in our company's products and want to know more information, please click on our company's website: www.beltsplicepress.com.