Views: 78 Author: Site Editor Publish Time: 2022-01-14 Origin: Site
Today, with the rapid development of technology, industrial production is greatly affected by technology. With the continuous development of conveyor belt technology today, food conveyor belting play a huge role in food transportation, effectively increasing the working speed of staff and greatly increasing production efficiency.
What are the matters needing attention when using food conveyor belting?
What are the material requirements for food conveyor belting?
How to maintain food conveyor belting?
(1) The rollers are covered with material to prevent rotation errors, prevent material from being caught between the rollers and the belt, pay attention to lubrication of moving parts, but do not lubricate the conveyor belt. ;(2) Avoid starting with load; (3) Adhesive tape In case of deviation, measures should be taken to correct it in time; (4) It is found that the local operation of the tape should be repaired in time to avoid expansion; (5) The tape should be prevented from being blocked by the rack, pillar or block material to prevent it from breaking and tearing.
What is needed to transport food is safe, non-polluting raw materials, that is, a non-toxic, non-odor, and smooth surface conveyor belt. In addition to PU, in the conveyor belt industry, the food-grade conveyor belt materials include PE (polyethylene), PVC (polyvinyl chloride), and SIR (silicone rubber). ), PTFE (Teflon) several kinds.
During transport and storage, the food conveyor belting should be kept clean, away from sunlight, rain or snow, avoid contact with acids, alkaline oils, organic solvents and other substances, and be kept at a distance of 1 m from heating devices. The temperature in the warehouse should be kept in the range of -18 ℃ -40 ℃ and the relative temperature should be kept in the range of 50-80% RH. During storage, the product should be stored unfolded in rolls. During storage, it should be rotated quarterly. Conveyor belts of different types and specifications are not suitable for joining, and the joints are best glued together. The type, design, specification and several layers of the conveyor belt should be selected reasonably according to the conditions of use. The speed of the conveyor belt should in principle not be 2.5 m / s, and the material with high lumpiness and abrasion and the use of a fixed plow unloading device should be as low as possible. The diameter of the conveyor driving roller, the matching of the fabric ply of the conveyor belt, transmission roller, reversing roller and the roller groove angle requirements should be selected reasonably according to the design requirements of the conveyor. In order to reduce the influence of material on the belt during the falling of the material, a trough should be used to reduce the distance of falling of the material; the tape receiving section should shorten the distance between rolls and use a buffer roller to prevent material leakage. A soft and moderate partition should be used to prevent the partition from becoming too hard and scratching the surface of the conveyor belt.
Our company's products are produced by professional staff to ensure quality problems. If you are interested in our company's products, please click on our company's website: www.beltsplicepress.com.
