Views: 55 Author: Site Editor Publish Time: 2022-02-11 Origin: Site
hydraulic ball joint press is a kind of equipment that uses various metal and non-metal materials for forming and processing. With the development of technology, this hydraulic press is more convenient to operate, more convenient for operators to use, and can use more functions within a safe range, which greatly promotes the increase in production.
What is the debugging method of hydraulic ball joint press?
How to use hydraulic ball joint press safely?
What matters should be paid attention to in the safe operation of hydraulic ball joint press?
1. Remove the lower bearing plate, the shutter, and the positioning core, and place the 0.10/1000 square level on the end face of the piston in the vertical and horizontal directions, find the vertical and horizontal direction to be horizontal to ±1 divisions, if it exceeds ±1 divisions, add on the bottom of the lower nut align the shim, tighten the anchor nut, and check until it is qualified.
2. The level debugging method of the dynamometer body:
Place the 0.10/1000 square level meter on a processed detection plane behind the upper box to detect the front and back levels. Hang A, B, C thallium on the pendulum rod, start the oil pump motor to run for 2-5 minutes, remove the residual gas in the oil pipe and the oil pump, close the oil return valve, open the oil delivery valve, make the piston rise 5-10mm, close the delivery Oil valve (the oil pump motor continues to run). At this time, check whether the engraved line of the pendulum rod is aligned with the upper and lower alignment engraved lines of the baffle. Otherwise, you can add a shim under the base and debug until the upper and lower alignment engraved lines are aligned. Tighten the anchor nut and check again. If there is an error, you can turn the balance thallium to adjust.
3. The hydraulic oil of the hydraulic ball joint press needs to be checked frequently and replaced regularly, otherwise, it will have a great impact on the overall processing performance of the hydraulic press
According to the processing requirements of hydraulic ball joint presses, formulate targeted and feasible safety operating procedures, and conduct necessary job training and safety education. The user and the operator must strictly abide by the regulations and operating procedures of the safety instructions provided by the design and manufacturing unit, and use and overhaul it correctly.
1. Those who do not understand the structure, performance, or operating procedures of the machine should not start the machine without authorization; 2. The machine should not be overhauled or adjusted during the working process; 3.When the machine finds serious oil leakage or other abnormalities (such as unreliable action, loud noise, vibration, etc.), it should stop and analyze the cause, try to eliminate it, and not put it into production with illness: 4. Do not overload or exceed the maximum eccentricity for use: 5.It is strictly forbidden to exceed the maximum stroke of the slider, and the minimum mold closing height shall not be less than 600mm. 6. The grounding of electrical equipment must be firm and reliable: 7．End of work every day: Put the slider to the lowest position.
Our company is committed to providing customers with the ultimate service, ensuring that the quality of the products after an order is guaranteed and that they will be delivered to you as quickly as possible. If you are interested in our company's hydraulic ball joint press, please click on our company's website: www.beltsplicepress.com.
