Transmission Belt Tangential Belt Transport and Process Belt Heating Clamp Press

The heating clamps is equipped with an electronic adjustment device integrated in the handle to automatically control the heating temperature.
Maximum temperature up to 200ºC
Heat the conveyor belt weld area,put the conveyor belt in the splicing rail and cover it with a pressure plate
If a voltage of 110V is required, a transformer can be provided.

Product Information:

1. Heating system: double side heating

2. Size: 50x50 and 150x85

3. Cooling: with cooling clamp

4. Temperature Control: Integrated digital temperature controller

5. Working Voltage: 220V Single phase

Options:

1. Guide Rails for different belt width

2. Small transformer special for customer need 110V voltage.

Features:

1. Variable temperature adjustment, controlled by one integrated temperature controller

2. Each kit include hot press with display temperature controller, cooling clamp, and guide rails.

3. For all melt splices; with double-sided heating platen and temperatures adjustable to 210 °C

4. Portable type

5. The heating pliers dispose of an electronic regulation integrated in the handle automatically controlling the heating temperature.

6. For heating the connection, the material is put in to a splicing guide and covered by a pressure plat

7. Dwell time will start automatically after the set temperature has been achieved.

50x50mm heating clamp press (can use for max 25mm width belt)
150x85mm heating clamp press (can use for max 75mm width belt)

Detailed Images: