Publish Time: 2022-03-07 Origin: Site
The development of technology has increased the functions of presses, and the types of presses can meet the technical requirements of different industrial production. The splice press is simple to operate, easy to clean, versatile, suitable for the high-intensity needs of long-term operations, frees up repetitive manual labor, improves work efficiency, greatly promotes the development of productivity, and to a certain extent promotes the development of the industry.
How to solve the problem of splice press?
What safety issues should be paid attention to in the operation of the splice press?
How does the splice press set the different temperatures of the upper and lower molds?
Do you need to splice multiple times?
What voltage is suitable for the splice press?
Only qualified electrical technicians can perform the electrical circuit maintenance of the press, but you can still check whether the light bulb on the control panel of the press is normal. Make sure that the light bulb is working in each shift and correctly display the various operations performed by the press.
When adjusting the position of the workpiece in the die area or removing the workpiece stuck in the mold, the foot must leave the pedal. Multiple people operating the same press should have a unified command and a clear signal, wait for the other party to make a clear response, and confirm to leave the danger zone before moving. Sudden power failure or operation should turn off the power, and restore the manipulator to clutch neutral, the brake is braking. The overhaul and adjustment of the press and the installation, adjustment, and disassembly of the mold should be carried out when the machine tool is disconnected from the energy source (such as electricity, gas, liquid) and the machine tool is stopped, and a cushion block is placed under the slider to be reliable Support. The machine start switch is listed and an alarm is displayed.
The upper and lower molds each have a thermostat, which can adjust the temperature independently, which is suitable for the joint requirements of different temperatures on the upper and lower surfaces of the conveyor belt.
The effective heating width of the hot plate is increased to 150mm, which eliminates the problem that sometimes the joint area cannot be completely covered. It is very suitable for the splicing of ultra-long tooth shapes (greater than 80mm) or double-layer or triple-layer toothing, which can achieve perfect joint quality.
The splice press has a variety of voltage options, and the device can work under different voltage conditions.
The splice press is easy to use, can simplify people's operating procedures, and facilitate industrial production. Our company has professional technicians who can guarantee the quality of the products. In addition, we will provide you with personalized customized services. If you are interested in our company’s splice presses, please click on our company’s website: Www.beltsplicepress.com.